B & C Eagle B16-212 2-1/2-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)

Our Price - $18.84

5 New - from $17.90

Availability - Usually ships in 24 hours

 
B & C Eagle B16-212 2-1/2-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box) B & C Eagle B16-212 2-1/2-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)

 

B & C Eagle B16-212 2-1/2-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)

B & C Eagle, 2,500 Count, 2-1/2" Galvanized Straight Finish Nail, 16 Gauge, Fits The Following Nail Guns: Hitachi NT65A, NT65A2, NT65A3, NT65M, Paslode MU212, 3250GF16, Duofast LFN764, Porter Cable FN200, FN250A, FN250B, CFN250, Senco FP32, Bostitch Sb1664FN, FN16250K, Dewalt D51256k, DC612KA, DC616KA, Ridgid R250SFA, Milwaukee 7145-21.

 

B & C Eagle B16-212 2-1/2-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box) Accessories

B & C Eagle B16-112 1-1/2-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)
Porter-Cable FN250B 3/4-Inch to 2-1/2-Inch 16-Gauge Finish Nailer
B & C Eagle B16-2 2-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)
B & C Eagle B16-34 3/4-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)
B & C Eagle B16-134 1-3/4-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)
B & C Eagle B16-114 1-1/4-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)
Paslode Cordless 16 Gauge Straight Finish Nailer #902000
B & C Eagle B16-1 1-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)
Paslode Short Yellow Fuel Cell 4-Pack #650039 for the Paslode Cordless Trim Nailers
Porter-Cable CFNBNS Three Nailer and Compressor Combo Kit

 

B & C Eagle B16-212 2-1/2-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box) Reviews

I bought these along with a Porter Cable air nailer for some trim work in a remodel project. The bad like most things "made in China." They seem to hold well, and I haven't had a jam after nailing up a couple hundred feet of trim. What can I say.

 

I have used over 10,000 of these nails in my Porter Cable FN250 nailer without a single problem. All in all a very good product. I have re-ordered and will continue to purchase.

 

These nails are not of the quality necessary for the Porter-Cable Finish Nailer that they are typically advertised with (FN250A). I would not recommend these nails, especially for this nailer. I called Porter-Cable, and acquired their nails, and the problems went away. They sometimes came out 2 at a time, not at all, or caused the nailer to jam.

 
Copyright © 2005-2006, Modern Power Tools | Sitemap